HF-LPT220 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com)
- 25 -
3.
OPERATION GUIDELINE
3.1.
Configuration
When first use HF-LPT220 modules, user may need some configuration. User can connect to HF-
LPT220
module’s wireless interface with following default setting information and configure the module
through laptop.
Table 8 HF-LPT220 Web Access Default Setting
Parameters
Default Setting
SSID
HF-LPT220
IP Address
10.10.100.254
Subnet Mask
255.255.255.0
3.2.
Usage Introduction
3.2.1.
Software Debug Tools
High-Flying use two common software tools debugging and applying HF-LPT220 module.
(User can also select other tools used to debug serial port).
Serial Debugging Software: ComTools
Ethernet Debugging Software: TCPUDPDbg
3.2.2.
Network Connection
User can select two methods to connect HF-LPT220 module base on dedicated application.
Use HF-LPT220 STA interface.
HF-LPT220 and debug PC2 connect to a wireless AP,
another PC1 (or user device) connect to HF-LPT220 module with serial port:
Figure 11.
STA Interface Debug Connection
Use HF-LPT220 AP interface.
Debug PC2 connect to HF-LPT220 through wireless
connection, another PC1 (or user device) connect to HF-LPT220 module with serial port.
