High End trackspot, Руководство пользователя

Страница: 25 / 82

Trackspot User Manual Enabling the Control Mode 2-3
2
Enabling the Control Mode
Once you determine which control mode to use, you must set the
fixture’s DIP switches to enable each Trackspot for that control mode
and to assign fixture order (or starting channel). The personality and
address DIP switches (all factory set OFF) are located on the rear panel
of the fixture (see Figure 2-1).
For sample personality and address switch settings in each control
mode, see “Linking the Fixtures” on page 2-12.
Personality Switches
The personality switch settings determine the fixture’s operating mode
and/or control mode. See Table 2-2 below for a detailed description of
personality switch settings. For a quick-reference table of personality
switch settings, see “Personality Switch Settings” on page C-1.
Table 2-2. Personality switch settings - operating modes
Operating
Modes
Personality
Switches ON
Description
Self Test
Starts an internal self-diagnostic routine
which verifies that the major functions of
the fixture (pan, tilt, gobo wheel, color
wheel, and shutter) are working properly.
The fixture performs its homing procedure
once (you will hear clattering sounds as the
shutter and mirror seek their home
position) and then repeats its self-test until
you set switch 1 OFF.
Note: Although a controller is not required
for the self-test, setting personality switch 1
ON will override any controller that might
be attached to the fixture.
FIXT URE MODE SWITCHES 1-2
NORMAL RUN
SELF TEST
SET-UP NONE
1
2
1,2
LIGHTWAVE CONTROL
DMX 1-256
DMX 257-512
ANALOG
AUDIO (SLAVE)
AUDIO (MASTER)
PAN INVERT
TILT INVERT NONE
5
4
4,5
3
6
7
AUDIO M IC PE RSONALITY ADDRES S ENABLE FAN
ANALOG IN
DATA OUT DATA IN
2209 WEST BRAKER L ANE, A UST IN, T EX AS U.S. A.
LIGHTWAVE RESEARCH
CONTROL MODE SWITCHES 3-8
8
PERSONALITY SWITCHES
ON
PLEASE CONSULT USER MANUAL
FOR FURTHER INFORMATION
LAMP SAVE
PLEASE CONSULT USER MANUAL
FOR FURTHER INFORMATION
ON
SWITCHES
ON
SWITCHES ADDRESS ADDRESS
1,2,3,5 24
2,3,5 23
1,3,5 22
3,5 21
1,2,5 20
2,5 19
1,5 18
5 17
1,2,3,4 16
2,3,4 15
1,3,4 14
3,4 13
1,2,4 12
2,4 11
1,4 10
4 09
1,2,3 08
2,3 07
1,3 06
3 05
1,2 04
2 03
1 02
none 01
FUSE
VO LT AG E SELECT
WARNING: CHANGE VOLTAGE SELECT ONLY WITH POWER REMOVED.
CAU TION : HO T R EMO VE POW ER BEFO RE RELA M PIN G
WARNING: NOT FOR RESIDENTIAL USE. TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE TO RAIN OR MOISTURE,
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL. FOR SAFE OPERATION CONSULT
USER MANUAL.
(UNREG.)
OUT
INPUT
SPECIAL ANALOG
CONSULT USERS MANUAL
FOR FUTHER INFORMATION
24 VDC
SHUTTER
MSPEED
TILT
GOBO DIM
PAN
COLOR
8
2
4
1
6 7
3
5
GND
5
3
7 6
1
4 2
8
ANALOG
0-10V
GND
trackspot
14
0
20
0
120
240
10
0
22
0
®
personality switches
address switches
Figure 2-1. Address and personality DIP switches
on
PERSONALITY
8 7 6 5 4 3 2 1