12
www.EJF.com
RETRACTS
PICTURE ON LEFT: Mark and tape the location of the NOSE gear door opening. There is a panel line on the front and
back where the door should be cut.
PICTURE ON RIGHT: The nose gear opening is about 1.75 inch wide (44.45mm), and .75 inch (19.05mm) from the
panel line in the fuselage. Once you cut the access door out, mount your nose gear retract when ready.
PICTURE ON LEFT: Test fit the retracts to the wing and mark the location where the air tube touches.
PICTURE ON RIGHT: Make a hole for the airline where the retract touches the wing.
