High End Systems TechnoArc Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 68

High End Systems TechnoArc Скачать руководство пользователя страница 1

TechnoArc™

User Manual

© Barco Lighting Systems, 2012, All Rights Reserved

Information and specifications in this document are subject to change without notice. Barco Lighting Systems
assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual.

Trademarks used in this text:

High End Systems, Wholehog, and Lithopatterns are registered trademarks: and intellaspot, Internal Effects, the
High End Systems globe logo, and the Hog logo are trademarks of Barco Lighting Sytems, High End Systems,
Inc. is a registered trademark of Flying Pig Systems. Belden is a registered trademark of Belden, Inc.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the
marks and names or their products. High End Systems disclaims any proprietary interest in trademarks and
trade names owned by others.

TechnoArc

User Manual

Version 1.0

September

, 2012

1
2
3
...
»

Содержание TechnoArc





































































Отзывы:

Нет отзывов