CHAPTER 4
Preset Programming
SolaWash 19 LED User Manual
33
Chapter 4:
Preset Programming
SolaWash 19 LED fixtures can be programmed through the onboard menu
system using Preset Programming. This section describes how to program
your fixtures for stand-alone operation using the on-board memory in each
fixture to create and store scenes.
Preset Programming Overview
Presets are built from combining scenes into programs and then assigning the programs to
Program Partitions for playback by a fixture designated as the Master and, if desired, groups of
slave fixtures assigned to a Program Partition. SolaWash 19 LED fixtures ship with factory
programmed scenes and programs ready for you to use or edit.
Creating presets consists of performing the following steps:
• Designating a fixture as the Master
• Selecting/Editing Scenes
• Sequencing Scenes into Programs
• Sequencing Programs into Program Partitions
• Configuring slave fixtures on the link to playback a Program Partition from the
master
Navigating to the Preset Menu
To enter the Preset Menu:
1. Press the
MODE/ESC button to enter the first level of the menu system. The display will
show Address and Info as the first two options in the top menu level.
The red star
*
indicates the current menu.
2. Using the
buttons, scroll to Preset.
3. Press the
button to select.
MODE
/ ESC