CHAPTER 3
Menu System
SolaWash 19 LED User Manual
29
Test Options Menu
This menu lets you manually Home the fixture and change DMX values for parameters.
To Enter the Test Options Menu:
1. Press the
MODE/ESC button to enter the first level of the menu system. The display will
show Address and Info as the first two options in the top menu level.
The red star
*
indicates the current option.
2. Using the
buttons, scroll to Test.
3. Press the
button to select.
Homing the Fixture
The SolaWash 19 LED fixture automatically homes whenever it is connected to power. The
following options are available to let you manually home all the fixture motors or motors for
specific functions:
All: Reset all motors
Others: Reset other motors
Pan & Tilt: Reset Pan/Tilt motors
For example, to manually home the pan and tilt motors:
1. Navigate to and select the Test menu as shown above.
2. Using the
buttons, scroll to Home and press the
button to select.
3. Using the
buttons, scroll to Pan & Tilt and press the
button to select. The fixture
automatically begins homing the Pan and Tilt motors.
Calibration
This Test menu option lets you fine tune the home position for Pan and Tilt motors.
For example, to calibrate Pan motor after homing:
1. Navigate to and select the Test menu as shown above.
2. Using the
buttons, scroll to Calibration and press the
button to select.
3. Using the
buttons, scroll to Pan and press the
button to select.
4. Using the
buttons, adjust the Gobo Wheel 1 offset value and press the
button to
store the calibration adjustment.
MODE
/ ESC
