SolaFrame Theatre v1.2.5
38
User Manual
Service PIN
Password
——The Password for this function is “50”.
RDM PID
—— With this function you can call up various submenus via RDM.
This device is RDM ready. RDM stands for "remote device management" and makes remote control
of devices connected to the DMX-bus. ANSI E1.20-2006 by ESTA specifies the RDM standard as an
extension of the DMX512 protocol.
Manual settings like adjusting the DMX starting address are no longer needed. This is especially
useful when the device is installed in a remote area.
RDM ready and conventional DMX devices can be operated in one DMX line. The RDM protocol
sends own packages in the DMX512 data feed and does not influence conventional devices.
If DMX splitters are used and RDM control is to be used, these splitters must support RDM.
The number and type of RDM parameters depend on the RDM controller being used.
Display Settings
Shut off time
With this function you can shut off the color LCD display after 2 to 60 minutes. Turn the encoder in
order to select the desired shut off time. The default is 5 minute.
1. Tap <MODE/ESC>button, access the main menu Tap the <Up/Down>button
until ”Set” is
displayed. Press ENTER, the display will show “Set”. Tap the <Up/Down>button until the display
will show “Disp.Setting”. Press ENTER, the display will show “Disp.Setting”.
2. Press <Up/Down> th
e display will show ” Shutoff Time”.
3. Press<ENTER> the
display will show ” Shutoff Time”.
Flip Display
With this function you can the entire display to be flipped by 180˚ to allow for better view when the
fixture is hung from truss or a ceiling. This function is disabled as default.
1. Tap <MODE/ESC>button, access the main menu Tap the <Up/Down>button
until ”Set” is
displayed. Press ENTER, the di
splay will show “Set”. Tap the <Up/Down>button until the display
will show “Disp.Setting”. Press ENTER, the display will show “Disp.Setting”.
2. Press <Up/Down>
the display will show ”Flip Display”.
3. Press<ENTER>
the display will show ”Flip Display”.
4.
The display show “OFF”, Press <Up/Down> the display will show “ON”.
5. Press <ENTER>; to confirm or press <MODE/ESC>; to return to the main menu.
Содержание SolaFrame Theatre
