High End Systems SolaFrame Theatre Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 48

High End Systems SolaFrame Theatre Скачать руководство пользователя страница 36

SolaFrame Theatre v1.2.5

36

User Manual

Dimming Mode

With this function, you can change between standard and theatrical dimming mode.

1. Tap <MODE/ESC>button, access the main menu

Tap the <Up/Down>button until ”SET” is

displayed. Press ENTER, the display will show “SET”. Tap the <Up/Down>button until the display
will show “Status”. Press ENTER, the display will show “Status”.

2. Press <Up/Down> the display

will show ”Dimming Mode”.

3.

Press<ENTER> the display will show ”Dimming Mode”.

4.

The display show “Standard”, Press <Up/Down> the display will show “Theatrical””.

5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu

CMY Curve

With this function, you change between linear and non-linear operation

1. Tap <MODE/ESC>button, access the main menu

Tap the <Up/Down>button until ”SET” is

displayed. Press ENTER, the display will show “SET”. Tap the <Up/Down>button until the display
will show “Status”. Press ENTER, the display will show “Status”.

2.

Press <Up/Down> the display will show ”CMY Curve”.

3.

Press<ENTER> the display will show ”CMY Curve”.

4.

The display show “Linear”, Press <Up/Down> the display will show “Non-Linear”.

5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.

«
...
34
35
36
37
38
...
»

Содержание SolaFrame Theatre

















































Отзывы:

Нет отзывов