Configure the Fixture
17
Set Menu
Set the Status Options
Navig ate: Main Menu
→
Set
→
Status
Parameter
Value
Description
No DMX Mode
•
Close
•
Hold
•
Auto
•
Music
Control mode when DMX is absent. The default
value is Hold.
Pan Reverse
•
ON
•
OFF
Reverse the pan movement of the fixture. The
default value is Off.
Tilt Reverse
•
ON
•
OFF
Reverse the tilt movement of the fixture. The default
value is Off.
Pan Degree
•
630
•
540
Change the pan rotation of the fixture from the
default setting of 540 degrees to 630 degrees.
Encoders
•
ON
•
OFF
Turn on or off the encoder feedback for pan and tilt
movement. You may want to turn off encoders when
working on a fixture so that you can move pan and
tilt without the fixture automatically moving back to
position.
Pan/Tilt Spd
1–4
Set the speed (scan mode) of pan and tilt move-
ment. The default value is 1. Use this parameter to
make fine adjustments to pan and tilt movement in
order to correct for mis-stepping when the fixture is
installed on its side (side-hung, or "Outrig").
Hibernation
•
OFF
•
1–99 minutes
Hibernation mode forces the LEDs and stepper
motors to power off when the fixture loses DMX con-
trol signal for a set period of time. The default time
setting is 15 minutes.
Defogger
•
Defog OnOP
•
Defog OnPwr
•
Defog Off
Set when the Defogger (heater for the front lens) is
turned on:
•
Defog OnOP: Turn on Defogger when LEDs are
above 0% intensity
•
Defog OnPwr: Turn on Defogger when the fixture
is powered (default value)
•
Defog Off: Turn off Defogger
Dimming Mode
•
Standard
•
Theatrical
Set the dimming curve. The default value is Stand-
ard.
Out Rig Mode
•
ON
•
OFF
Turn on when the fixture is installed on its side (side
hung, or "Outrig"). This parameter reduces the
speed of pan and tilt movement to correct for mis-
stepping.
