Power Up
To power on the fixture, connect it to an appropriately-rated power source. (200-240 V, 50-60 Hz,
minimum 18A). The fixture will begin an automatic homing process.
SHOWBEAM 2.5 Onboard Menu System
Configuring Your SHOWBEAM 2.5 Fixture
To Set the Start Channel on an SHOWBEAM 2.5 fixture:
1. Unlock the menu system by pressing and holding down the MENU button until the extended
2-line display appears. The DMX ADDRESS menu is the first option at the top menu level.
2. Press the Enter button to select. The display will show SET DMX START CHANNEL###. The
display will show the Start channel # currently assigned to the fixture.
3. Use the UP and DOWN arrows on the NAVIGATION button to select a new DMX start channel.
The display will flash a new option ready for selection.
Note that the SHOWBEAM 2.5 fixture uses a 32-channel range on a DMX link.
4. Press the ENTER button to accept the new DMX Start channel.
Getting Help
You can find SHOWBEAM 2.5 information online at www.highend.com/support/ or contact High
End Systems tech support by email at [email protected] or by phone at 1.800.890.8989.
Caution!
Do not unplug motor harnesses while unit is powered.
Use
LEFT
and
RIGHT
arrows to
move through the current
menu level options
Use
UP
and
DOWN
arrows to
select from available value or set-
ting options.
Use the
MENU
button (on the left
when viewing the display) to
unlock the menu and move back
to the previous menu level
Center Navigation
Button
Use the
ENTER
button (on the
right when viewing the display)
to store a selected menu value
or option.
