Hifonics ZEUS EXTREME ZXT1400/4, Руководство пользователя

Страница: 22 / 32

22
ENGLISH
DESCRIPTION OF OPERATION
INPUT
MODE
2CH
4CH
INPUT
SENS.
50 Hz 500 Hz
HIGH
PASS
LOW
PASS
HIGH
PASS
FULL HP
X-OVER MODE
HP FULL LP
X-OVER MODE
FL
FR
RL
RR
ZXT 1400/4
ZXT 1400/4
INPUT
SENS.
FRONT REAR
FL
BRIDGED
FR
RL RR
SPEAKER OUTPUT
LINE INPUT
Connect the LINE INPUT RCA jacks with the head unit by using appropriate audio signal cables. If
only the channels FL and FR are occupied, the INPUT MODE button should be in switch position 2CH.
7
INPUT SENS. FRONT
This controller determines the input sensitivity of channel pair FRONT in order to adapt the incoming
signal from the head unit (car radio).
9
7 8 9 10 11
INPUT MODE
The INPUT MODE switch button is used to set whether the amplifier should be driven by the head unit
with only one stereo signal (2CH) or with two stereo signals (4CH). Only in switch position 4CH, the
so-called fader function of the head unit is effective.
In switch position 2CH, the input signal from FRONT (FL/FR) is routed to REAR (RL/RR) and only a
stereo signal on LINE INPUT FR/FL is necessary.
8
X-OVER MODE FRONT
This switch selects the desired operating mode of channel pair FRONT:
FULL: Full Range mode - the entire frequency range is amplified.
HP: High Pass mode - adjustable with HIGH PASS - frequency is limited downwards.
11
HIGH PASS FRONT
This controller limits the frequency of the audio signal on channel pair FRONT downwards and lower
frequencies are filtered out. The crossover frequency is adjustable from 50 Hz to 5.000 Hz (5 kHz).
10