Hifonics PLUTO IV, Руководство пользователя

Страница: 18 / 32

18
ENGLISH
TECHNICAL SPECIFICATIONS
Model
PLUTO IV
Channels 4
Circuit Digital Class D
OUTPUT POWER RMS @ 14.4 V
Watts @ 4 Ohms
Watts @ 2 Ohms
Watts @ 4 Ohms bridged
4 x 50
4 x 95
2 x 190
Loudspeaker Impedance 2 - 8 Ohms
Frequency Range –3dB 9 - 44000 Hz
Damping Factor > 100
Signal-to-Noise Ratio 105 dB
THD+N < 0,005 %
Input Sensitivity 6 - 0,15 V
Filter Front
Crossover Modes
High or Low Pass Filter
Bass Boost
HPF / FULL / LPF
40 - 250 Hz
0 dB / 6 dB / 12 dB
Filter Rear
Crossover Modes
High or Low Pass Filter
Bass Boost
HPF / FULL / LPF
40 - 250 Hz
0 dB / 6 dB / 12 dB
Start-stop capability > 6,5 V
High Level Inputs with EPS
Yes
Low Level RCA Inputs & Outputs Yes (via Wire Harness)
Auto Turn On Yes
Fuse Rating 1 x 30 A
Dimensions 115 x 35 x 166 mm
All Specifications are subject to change
INTENDED USE
DISPOSAL
This product is only designed for use in a vehicle with 12 volt on-board voltage and negative ground and func-
tions as an amplifier for audio signals. Any other use may lead to damage to the product or in the vicinity of
the product.
If you have to dispose the device, please note that no electronic devices may be disposed in the
household waste. Dispose the device in a suitable recycling facility in accordance with local waste
regulations. If necessary, consult your local authority or your dealer.