Hifonics 806586221552, Руководство пользователя

Страница: 24 / 32

24
INTERCONNECTION EXAMPLE
3-channel-mode: 1 x Stereo-System and 1 x Mono Subwoofer
FUNCTIONAL INSTRUCTIONS
INTERCONNECTION
• Connect the RCA lineouts of the head unit with the RCA jacks LINE IN of the amplifier with appropriate high-value RCA cables.
If a separate SUB OUT from your head unit is available, use this for the LINE IN CH3/4 on the amplifier.
• Connect the speakers with SPEAKER CH 1 - and + CH 2 -, and the subwoofer with the SPEAKER OUTPUT CH3/4
+ BRIDGED - of the amplifier.
• Always ensure that the total impedance load per channelpair (CH1 & CH2) is not lower than 2 ohms and the total impedance load
of the subwoofer (CH3 & CH4) is not lower than 4 ohms. Too low impedance cause high temperature and will shut down the
amplifier operation.
INPUT MODE SWITCH
• Refer to the notes on page 22.
CROSSOVER SETTINGS CH1/2 (STEREO SYSTEM)
• Refer to the notes on page 22.
LEVEL CONTROLLER CH1/2 (STEREO SYSTEM)
• Refer to the notes on page 22.
BASS BOOST CONTROLLER CH1/2 (STEREO SYSTEM)
• The BASS BOOST controller must be turned to 0 dB position in this interconnecting example .
CROSSOVER SETTINGS CH3/4 (SUBWOOFER)
• Refer to the notes on page 23.
LEVEL CONTROLLER CH3/4 (SUBWOOFER)
• Refer to the notes on page 23.
BASS BOOST CONTROLLER CH3/4 (SUBWOOFER)
• The BASS BOOST controller adjusts the bass enhancement between 0db and +12dB.
BASS REMOTE CH3/4 (SUBWOOFER)
• The enclosed BASS REMOTE CONTROLLER adjusts the bass-level e.g. from the driver’s seat of the subwoofer on CH 3/4.
Please use only this enclosed bass remote controller and cable.
POWER INPUT SPEAKER OUTPUT
PROTECT
POWER
FULL HP
LP HP LEVEL
BASS LEVEL
CONTROLLER
0dB 12dB
LINE OUT
X-OVER
MODE
10Hz 1.2kHz 30Hz 250Hz
CH3
CH4
MIN MAX
10Hz 1.2kHz MIN MAX
GND +12V REM
FULL HP DUPE
BASS BOOST
LINE IN
CH1
CH2
2CH 4CH
INPUT MODE
BRIDGED
CH4 CH3
LP
BRIDGED
CH2 CH1
VXi6404
FUSE
4CH MONO MIX
X-OVER MODE
CH3/4
CH1/2
VXi6404
POWER INPUT SPEAKER OUTPUT
PROTECT
POWER
FULL HP
LP HP LEVEL
BASS LEVEL
CONTROLLER
0dB 12dB
LINE OUT
X-OVER
MODE
10Hz 1.2kHz 30Hz 250Hz
CH3
CH4
MIN MAX
10Hz 1.2kHz MIN MAX
GND +12V REM
FULL HP DUPE
BASS BOOST
LINE IN
CH1
CH2
2CH 4CH
INPUT MODE
BRIDGED
CH4 CH3
LP
BRIDGED
CH2 CH1
VXi6404
FUSE
4CH MONO MIX
X-OVER MODE
CH3/4
CH1/2
VXi6404
Connect stereo RCA outputs (FL/FR & RL/RR or
SUB OUT) of the head unit with LINE IN CH1 / CH2
and CH3 / CH4 of the amplifier
Loudspeaker
left, front
2 – 8 Ohms
Loudspeaker
right, front
2 – 8 Ohms Subwoofer 4 – 8 Ohms
Connect Bass
Level Controller
with the enclosed
cable
LP HP or FULL
4CH