Hifonics 806586221552, Руководство пользователя

Страница: 18 / 32

18
MECHANICAL INSTALLATION
Before you start with the installation of the sound system, disconnect necessarily the GROUND connection wire from the
battery to avoid any risk of electric shocks and short circuits.
NOTE
Avoid any damages on the components of the vehicle like air bags, cables, board computer, seat belts, gastank or the like.
Ensure that the chosen location provides a sufficient air circulation for the amplifier. Do not mount the device into small or sealed spaces
without air circulation near by heat dispersing parts or electrical parts of the vehicle.
Do not mount the amplifier on top of a subwooferbox or any other vibrating parts, whereby parts could loosen inside.
The wires and cables of power supply and the audio signal must be as short as possible to avoid any losses and interferences.
At first you need to find a suitable installation location for
the amplifier. Ensure that enough space for the installati-
on of the cables remains and that they will not be bended
and have sufficient pull relief.
Lay the amplifier aside and then drill the holes for the
mounting screws at the marked locations.
Please ensure not to damage any components of the ve-
hicle while you drilling the holes. Alternatively (depends
on the material of the surface) you can also use self-tap-
ping screws.
Keep the amplifier at the chosen mounting location in the
vehicle. Then mark the four drill holes with an appropria-
te pen or peening tool through the designated mounting
holes at the amplifier.
Then uphold the amplifier to the chosen position and fix
the screws through the mounting holes into the drilled
screwholes.
Ensure that the mounted amplifier is tightly fixed and can
not come loose while driving.
1
3
2
4
PHASE
POWER INPUT
SPEAKER OUTPUT
PROTECT
POWER
LP
SUB
SONIC LEVEL
LINE IN
35Hz 250Hz 15Hz 55Hz
GND +12V REM
FREQ.
RANGE
BALANCED
INPUT
R
L
VXi 2000 D
FUSE
BASS LEVEL
CONTROLLER
SUB
BOOST Q-CONROL
0dB 12dB WIDE NRW 20Hz 80Hz
EXTENDED BASS CONTROL
SLAVE MASTER
MODE
SLAVE IN
MASTER OUT
0 ° 180 ° MIN MAX
PHASE
POWER INPUT
SPEAKER OUTPUT
PROTECT
POWER
LP
SUB
SONIC LEVEL
LINE IN
35Hz 250Hz 15Hz 55Hz
GND +12V REM
FREQ.
RANGE
BALANCED
INPUT
R
L
VXi 2000 D
FUSE
BASS LEVEL
CONTROLLER
SUB
BOOST Q-CONROL
0dB 12dB WIDE NRW 20Hz 80Hz
EXTENDED BASS CONTROL
SLAVE MASTER
MODE
SLAVE IN
MASTER OUT
0 ° 180 ° MIN MAX
PHASE
POWER INPUT
SPEAKER OUTPUT
PROTECT
POWER
LP
SUB
SONIC LEVEL
LINE IN
35Hz 250Hz 15Hz 55Hz
GND +12V REM
FREQ.
RANGE
BALANCED
INPUT
R
L
VXi 2000 D
FUSE
BASS LEVEL
CONTROLLER
SUB
BOOST Q-CONROL
0dB 12dB WIDE NRW 20Hz 80Hz
EXTENDED BASS CONTROL
SLAVE MASTER
MODE
SLAVE IN
MASTER OUT
0 ° 180 ° MIN MAX
4 x
4 x
4 x
4 x
Drill
Mounting hole
Mounting hole
Marking
Pen or
peening
tool
Mounting
screw