Easy HD Expressway!
BR-101E QIG
WWW.HIDES.COM.TW
17
Click on “Load” button to load previous setting.
Click on “…” buttons to browse and specify the call sign MPEG2 TS file.
The video PID in the MPEG2 TS file (Call Sign Original PID) should be specified
and changed to the new PID number (New PID”, which should be the same as the
video PID of the missed RF-input.
“Period (sec)” specify how long call sign should be sent. When the period expires, Tx
RF-out will be shutdown. (When RF-in is present again, Tx RF-out will be resumed.)
Then click on “Set” button to start flashing new call sign settings to the board
EEPROM.
When update is done, set DTV bridge board in normal operation mode by short
Jumper J1. Then, power off and power on to reset.