Easy HD Expressway!
BR-101E QIG
WWW.HIDES.COM.TW
11
In BLOCK mode, the PID’s specified will be blocked by the filter.
In PASS mode, the PID’s specified can pass the filter.
By default, it’s recommended to block null-packet (PID=0x1FFF).
5.
Modulation Parameters
An IQ table can be specified to optimize the modulator performance, but it’s
optional and can be ignored.
6.
PCR restamp and cell ID
DTV Bridge board supports PCR restamp feature to fix PCR jitter while
modulation.
It’s optional to enable it, and three restamp mechanisms are supported. Refer to
IT9510 datasheet for details.
Optionally, users may specifies the Tx cell ID desired.
7.
Write EEPROM
Click on “Write EEPROM” for the new settings to take effect.
When configuration is done, set DTV bridge board in normal operation mode by short
Jumper J1. Then, power off and power on to reset.