March 24, 2010
Page 17 of 17
© 2010 HID Global Corporation. All rights reserved.
OMNIKEY 2061 Bluetooth Reader
2061-905_ A.1
User Manual, Firmware V1.27
6 .2
Tosh iba Blu e t oot h St a ck
1. Power on the OMNIKEY 2061 Bluetooth reader. The green LED is illuminated. If not verify
the batteries are charged.
2. Pair the reader with the host:
a. Open
the
Bluetooth
dialog; click
Start
>
Programs
>
TOSHIBA
>
Bluetooth
>
Bluetooth Settings
.
b. Follow the dialog, click
Next
.
c. Select your OMNIKEY 2061 Bluetooth reader from the list of found Bluetooth
devices and click
Next
.
d. The assigned COM port is displayed. The COM port number is needed for the
driver configuration.
e. Click
Next
to finish the pairing process.
3. Open a command shell and switch to the installation directory of the configuration
software. The default path is
C:\Program Files\HID Global\OMNIKEY 2061 Bluetooth
.
4. Install a driver instance by calling
OK2061_install.bat
. For this step, required are
administrative privileges.
5. Configure
the
driver:
a. Open the registry editor.
b. Change
to
HKLM\System\CurrentControlSet\Enum\Root\SMARTCARDREADER
c. Select the corresponding driver instance key, for example
0000
. Select the
Device
Parameters
key of the corresponding driver instance key.
d. Add a new DWORD Value
Port
and set the assigned Outgoing COM port for this
value.
6. The driver connects the OMNIKEY 2061 Bluetooth reader and the
Bluetooth Security
dialog is displayed. Enter the reader PIN. The reader is connected and operable.
