HID FARGO DTC4500e Скачать руководство пользователя

Страница: 72 / 83

Page 72 of 83

October 2013

DTC4500e Card Printer User Guide, PLT-01669, 1.0

Error Message

Cause

Solution

# 64
# 65
# 66
Reboot Required

Unspecified system error detected by

the printer firmware.

Reset the printer and try again.
If this problem persists, call for

technical assistance.

# 68
Card in Printer

A card is jammed in the print station or

card flipping area of the Printer.

Clear the jam and press the

Pause

button.

# 70
Multiple Feed

Multiple cards were fed into the printer.

Verify the card thickness is set to the

thickness of your cards, then press the

Pause

button.

Check for card slippage. If necessary,

run the printer cleaning routine
Verify the cleaning roller is properly

installed on the ribbon cartridge.
Verify the cards are not sticking

together.

# 81
Unable to Feed

The printer is unable to feed a card from

the input card hopper.

Check the following, then press the

Pause

button to continue.

Verify the card thickness setting is set

to the thickness of your cards.
Verify the Cleaning roller is properly

installed on the Ribbon Cartridge.
Check for card slippage. If necessary,

run the Printer cleaning routine.
Verify that your cards are within the

perimeters accepted card size range.
Verify the cards are not sticking

together.

# 82 Mag Jam

A card is jammed magnetic station

Clear any cards in the magnetic station

using the buttons to move the card out.
Press the

Pause

button to continue.

# 91
Ribbon Out

The print ribbon has run out.

Install a new ribbon.
Press the

Pause

button to continue or

the ON/OFF button to cancel.

# 93
Wrong Ribbon

The print ribbon installed in the printer

does not match the ribbon type selected

in the printer driver.

Change either the installed print ribbon

or the ribbon type selected in the

printer driver.
Press the

Pause

button to continue or

the ON/OFF button to cancel.

# 97
Ribbon Search Error

The ribbon is not able to find the next

panel correctly.
Check for jams/breaks.

Recalibrate the ribbon sensor.
If broken, repair by taping the ribbon

back on to the take- up core.
Replace the ribbon.
Press the

Pause

button to continue or

the ON/OFF button to cancel.

Содержание FARGO DTC4500e











































































Результаты поиска

Содержание FARGO DTC4500e

Отзывы:

Похожие инструкции для FARGO DTC4500e

Бренды по названию

Популярные бренды

HID FARGO DTC4500e, Руководство пользователя

Результаты поиска

Содержание FARGO DTC4500e

Отзывы:

Похожие инструкции для FARGO DTC4500e

Бренды по названию

Популярные бренды