2. Product Overview
1. Bell
3. Accelerator
6. Charger port
2. Control panel
1. Unfold the stem and push it until you hear a click.
Then unfold the kickstand to support the scooter.
3. Screw four of the screws provided
(two on each side) with the provided Allen
wrench. Install the headlight with the longest
screw on the stem.
4. Ensure your scooter powers on and off.
2. Connect the headlight cable. Then, slide the
handlebar onto the stem. Make sure it's the right way round.
3. Assembly
3
2
5. Folding mechanism
4. Front lamp
7. Motor
8. Kickstand
10. Disc brake
9. Brake lamp
Note
Aim at the arrows
to connect
