6
HP
Replacing the Chamber Block
HP-
100
/
120
REPLACING THE CHAMBER BLOCK
STEP
16
STEP
16
Insert a new safety pin through the hole on the
terminal side.
(Please Insert safety pin through the spring
electrode, L-shaped lever in such order.)
STEP
17
STEP
17
Install the locking collar from the other side of the
terminal and insert it until it clicks.
STEP
18
STEP
18
This completes the replacement of the safety pin
procedure.
Make sure the gap between L-shaped lever and
tab of the actuating rod is even.
●Be careful not to touch the terminal when the power is
on, testing the operating conditions as this will result in
an electric shock.
●Unplug the pump immediately after the check.
STEP
19
STEP
19
Secure the frame cover with the screws.