HIAB X-Duo 044 Скачать руководство пользователя страница 88

Страница: 88 / 124

Maintenance and Service

Operator's Manual GB

8.3.1

Add-on equipment and separate accessories
(hoist etc.)

• Check the cables, cable connections, the cable

guides and the attachment points for the add-
on equipment.

• Maintain all add-on equipment, separate ac-

cessories, auxiliary equipment etc. according
to the instructions supplied with it.

Hoist

• Visual check of the rope. In the event of

damage to the rope, see the rules how to
handle this in section: Check rope.

• Check cables, cable connections, rope guides

and the attachment points.

• Polyamid parts as well as all bolt components

have to be checked and must be replaced in
case of wear and tear.

Electronic components

• Check that these are in good condition.

• LED test

To do the test:

1. Push the ON/OFF button for at least 2 sec.

The test is activated and all the red LEDs
are illuminated.

If the system is equipped with warning
lights / lamp pole, lamps will come on.

2. Release the button. After 3 sec, all the

green the LEDs are illuminated. The test is
finished when all LEDs is extinguished.

Содержание X-Duo 044





























































































































Результаты поиска

Содержание X-Duo 044

Отзывы:

Похожие инструкции для X-Duo 044

Бренды по названию

Популярные бренды

HIAB X-Duo 044, Руководство оператора

Результаты поиска

Содержание X-Duo 044

Отзывы:

Похожие инструкции для X-Duo 044

Бренды по названию

Популярные бренды