background image

 

8

Warning 

 

  If the inflation continues and doesn’t stop, please untie 

the cuff immediately or turn off the unit by pressing the 

POWER 

button. 

  Do not measure repeatedly for a long period of time.   

  This device is not supposed to be used if your wrist has 

any wound or injury.   

  Remove batteries if not using the device for a long time.   

  Do not use batteries in different type or brand for this 

may lead to an incorrect reading and possibly cause 
battery explosion (mix using alkaline and heavy duty 
batteries).  

  Leaving the batteries in the blood pressure monitor for 

over 3 months and not using the device may damage 
the device by battery leakage. Please read the 
Installing/Replacing Batteries section in this manual.   

  The device might not meet its normal performance if 

stored or used beyond the temperature and humidity 
ranges specified below.     

 Operating conditions: 10

~40

, 40%~85% R.H.   

  Conditions for storage: -20

~50

, 15%~85% R.H.   

 
 
Suggestions before Measuring Blood Pressure 
 

1.  Please relax yourself physically and mentally for at 

least 5-10 minutes before measurement.   

2.  Avoid eating, smoking, exercising, bathing and drinking 

(alcohol/coffee/tea) for at least 20-30 minutes before 
measuring your blood pressure.   

3.  Be sure the wrist cuff is at the same level as your heart.   
4.  Stress raises blood pressure. Keep calm and relaxing 

during measurement.   

5.  Please DO NOT talk or speak during measurement.   

Содержание HB-ZA310V































Отзывы: