19
How to Use the Memory Features
The blood pressure and pulse measured and displayed are
automatically stored in the memory. The blood pressure
monitor can store up to 80 measurements. If more than 80
measurements have been taken, the earliest measurement
will be erased and replaced by the most recent
measurement.
1.
Review the Average Value and previously
measurements:
Press
MEMO/
▲
button, the unit first display the
average values of Systolic, Diastolic and Pulse with
voice prompt. (Averaged from all memorized readings.)
Press
MEMO/
▲
button again to review the
measurement from the latest to the earliest with voice
prompt.
The latest measurement (
M 01
) appears when you
press
MEMO/
▲
button.
M 01
is the latest reading
measured. The Systolic, Diastolic, Pulse and Date/Time
of the measurement will be displayed. Press
MEMO/
▲
button to repeatedly review other memorized readings.
The readings will be displayed as
M 02, M 03, M 04
…
etc. You can press
SCAN/
▼
button to switch to the
automatic display mode.
2.
Scan all previous measurements:
Press
SCAN/
▼
button, the unit will display all
measurements one by one in one in one second
interval. In the automatic display mode, it doesn’t have
voice prompt function. You can press
MEMO/
▲
button
to switch to the single display mode.
