Hi-Target V90 Plus, Начало работы

Страница: 41 / 128

38
Hi-Survey
3. Take iHand20 NFC response area close to receiver's NFC response area.
4. Base setting
Base operation guidelines
Base parameters settings in Hi-Survey
Base operation guidelines
For good performance, read the following guidelines, Below will describes best practices for setting
up the base, and outlines the precautions that users need to take to protect the GNSS receiver.
1. Set up tripod centered on the control point, mount tri-branch adaptor and height extension pole.
2. Screw GNSS receiver onto the height extension pole.
3. Level and plumb GNSS receiver over control point.
4. Instrument height should be measured from control point to the upper of measurement bench
marker. (See diagram in chapter 2)
Notice: Ensure to place the GNSS receiver in a stable and secure location, and make sure no
interference source disturb or disrupt differential signal transmission. Such as electrical tower etc..
Base parameters settings in Hi-Survey
(1) Connecting base
(2) Setting Base coordinate
(3)Setting data link
Setting parameter of Base after connected.
NFC response area