1
2
3
DLP-Link 3D Active Glasses
User’s Guide
Model
：
C+D3PG
3D Active Glasses For DLP 3D Projectors and TVS
Product Overview
Package Contents
1. DLP-Link 3D Active
2. Cleaning Cloth x1
3. User’s Guide x1
4. USB charging cable x1
5. Interchangeable Nosepiece x3
Glass x1
This DLP-Link 3D active glasses are designed to be used with all 3D DLP projectors
3D TVs . The DLP-Link 3D glasses ,equiped with high transmittance and high contrast ratio
liquid crystal lenses, offer the brightest 3D visual experience.
and
* Important Notice:
For a better performance of the battery, please follow the guide below when using:
1) continuously using the glasses until the LED give low battery warning blinking for the first
time using, and then full charge the 3D glasses for at lest 12 hours;
2) If the glasses not being used, please fully charged the glasses at least one time within
each 3 months.
Shutters
LCD
Weight
39g
Refreshing
rate
96/100/120/144HZ
Transmittance
38
+/-
2
%
Working
current
2.8mA
Contrast
riato
1200
:
1
Power
supply
Rechargeable battery
Sync
operation
DLP-Link
Battery
life
24 hours continuously
working
Working
Condition
Working
temperature
0-40
℃
Storage
temperature
Specification
-5
-50
℃
℃
Using range
approximately
8m
Earpieces
Power Button
LCD Lenses
DLP-Link Window
LED Indicator
Charge the 3D glasses:
Please charge your 3D glasses
the USB port of your computer or the 3D glasses charger ( sold separately) with supplied
USB charging cable when they give low battery warning . Red LED indicator will keep
lighting on until the charging is finished. A full charge may take 4 hours.
by connecting the 3D glasses to
Operation Guide
Viewing 3D Contents with the DLP-Link 3D Active Glasses:
1. Turn on both your DLP 3D Ready projector and your 3D content source (such as a 3D
Blu-ray player).
2. Set your DLP 3D Ready projector in “DLP 3D” BEFORE you turn on your content
source like a 3D Blu-ray player. The Blu-ray player communicates with the projectors
to determine whether or not the projector is capable of playing 3D content. If this
communication occurs before you set the projector to 3D mode, the player will think
that the projector is not capable of displaying a 3D image and will only play the video
in 2D format. If this happens, turn the 3D Blu-ray player off, set the projector to 3D mode,
and then turn the 3D Blu-ray player back on so the communication between the two can
connect correctly.
3. Turn on your 3D content source. You can now press and release the Power ON/OFF
button to turnon your DLP-Link 3D Glasses and start watching 3D content.
* The LED indicator will light on for 1.5s to indicate the glasses are turned on, If the
battery is low , the LED idicator will blink once per second , please charge your 3D
glasses if this happened.
Product Features
Q1: What can I do if there is no 3D effect after I have put on and turned on the glasses
？
Try this:
1. Please check if the projector/TV setup is in DLP 3D mode or not.
2. Check the battery volume of your glasses, please change it if low in power
3. Make sure you are watching in 3D sync signal covered area .
Q2: Why do the lenses blink when watching 3D films
？
Try this:
1. Please change the battery immediately if the battery is seriously low.
2. Interference such as magnetic fluorescent lamps 50 or 60Hz may cause flickers,
please turn off interference source if this occurs.
Troubleshooting
The 3D glasses will activate their Auto OFF and Auto run intelligently in the following conditions.
1. The 3D glasses are standby (for a period of 5 minutes) when powered on, and they will
turn into working mode once received the 3D sync signal during standby mode, otherwise,
the glasses will automatically turn off with the green LED indicator blinking three times.
2. If the 3D glasses become disconnected with the SYNC signal because of
:
1>
incorrectdistance and or angle, 2> input source changed, 3> switched to 2D mode, they
will automatically work for a period of 5 seconds. The glasses will resume working once a
3D sync signal is received, otherwise, the glasses will enter into standby mode(for 5 minutes).
Use Tips
4. Turn off your 3D glasses by pressing and holding the power button for about 1.5s after
finish your 3D viewing.
* The LED indicator will blink 3 times to indicate the glasses are turned off. when the
sycn signal is blocked or the projector is exited “DLP 3D” mode, the glasses will turn off
after 5min standby and will “wake up” if the signal is the sync signal is received within
this period.
Maintain the 3D Active Glasses:
Clean the 3D active glasses with a clean and lint-free cotton cloth or with specified
disposable lenses cleaning tissue.
REV 0.1
