© 2018 HI-POD INC.
(PAGE 25)
Then there is a secondary screw
(see left) which comes up after the
main screw is inserted which
tightens this mechanism in place.
Be aware that there are two parts
of these screws, and both must be
in place to hold tightly.
Now, you need to mount the strain relief and quick lease plate in the
correct way so that the cables are available on the correct sides to plug
into the camera.
The HDMI cable will need to
come out on the
left
side of
the plate/head structure.
The lanc cable (with the
yellow tag) will need to come
out of the
right
side of the
plate/structure.
This places the cables on the
correct sides of the assembly
where they will plug into the
camera ports in a following
step.
