Shenzhen Hi-Link ELectronics Co.,Ltd
User Manual
HLK-LD2410
9
Figure 10 Schematic Diagram of Detection Range (wall-mounted height is 1.5 meters)
5.5 Installation Conditions
Confirm the minimum installation clearance
If the radar needs to be installed with a casing, the casing must have good wave-transmitting
properties at 24GHz, and cannot contain metal materials or materials that have a shielding effect
on electromagnetic waves.
Installation environment requirements
This product needs to be installed in a suitable environment. If it is used in the following environments, the
detection effect will be affected:
•
There are non-human objects that are continuously moving in the sensing area, such as
animals, continuously swinging curtains, large green plants facing the air outlet, etc.
•
There is a large area of strong reflectors in the sensing area, and the strong reflectors will
cause interference to the radar antenna.
• When installing on the wall, external interference factors such as air conditioners and electric
fans on the top of the room need to be considered.
Precautions during installation
•
Try to ensure that the radar antenna is facing the area to be detected, and the surrounding area
of the antenna is open and unobstructed
• To ensure that the installation position of the sensor is firm and stable, the shaking of the radar
itself will affect the detection effect.
• To ensure there is no movement or vibration on the back of the radar. Due to the penetrating
nature of radar waves, the back lobe of the antenna signal may detect moving objects behind
the radar. A metal shield or metal backplane can be used to shield the radar back lobe and
reduce the impact of objects on the back of the radar
•The theoretical distance accuracy of radar is the result obtained through special algorithm
processing on the basis of the physical resolution of 0.75 meters. Due to the difference in the
