HHP IMAGETEAM 5600, Руководство пользователя

Страница: 41 / 144

3 - 5
Automatic Trigger
The scanner scans continuously at full power with illumination fully on.
Presentation Mode
The LEDs are off until a bar code is presented to the scanner. Then the LEDs
turn on automatically to read the code. Presentation Mode uses ambient light to
detect the bar codes. If the light level in the room is not high enough,
Presentation Mode will not work properly.
Centering
Use the centering feature to narrow the imager’s field of view to make sure that
the imager reads only the bar code you want. For instance, if multiple codes are
placed closely together, centering will make certain that only the desired code is
read. When centering is turned on, the imager only reads codes that intersect or
are contained within the centering window you set up. At least part of a bar code
must be within the window to be decoded or output by the scanner.
Note: If you want to change the window, it is recommended that you try 20%.
Scan the bar code below to set the window to 20%.
Automatic Trigger
Presentation Mode
* Centering Off
Centering 20%