HH Simonsen ROD VS4, Быстрый старт, Страница: 9 / 16

appliance or the products packaging, e.g. Plastic wrap-
ping or films should also be kept out of reach of babies
and young children
• Arrange the power lead in a way that it will not cause
obstruction or can be tripped over
• Protect the power lead from damage. Never pull on the
power lead. Hold the power plug when removing it from
the power socket
• Clean the product with a slightly dampened (not wet
cloth. Always disconnect the product from the power
supply before cleaning and ensure the unit has cooled
down
• To prevent possible overheating, never place towels or
similar such items over or under the appliance
• Do not attempt to repair the product or connection cable
by yourself
• As with most electrical appliances, electrical parts
remain live even when the unit is switched off!
Never switch on the appliance when:
• The appliance or the power lead is damaged
• The device has been dropped, shows visible damage or is
not functioning properly
• The appliance is damaged to such an extent that electri-
cal parts are exposed
The product must be unplugged from the power supply
when:
• A defect occurs during operation
• You wish to clean the appliance
• The application power switch is in OFF-position
• The appliance is not being used
!Attention
• Risk of burns! Do not let bare skin come into contact with
the heating plates during or after use until such time that
the plates have cooled down
• When in use, the power cable should not be allowed to
come into contact with the heating plates
• Do not wind the power cable around the appliance, this
can break the cable!
• When in operation only place the appliance down on firm
heat resistant surfaces
• Make sure the appliance has completely cooled down
before storing away
• This appliance is designed for use indoors only. Do not
use outdoors e.g. in a garden or terrace etc.
• This appliance has been designed for use as a hairstyling
iron only and must only be used with product specifically
designed for use with a heated styler
Note
This appliance has been designed for commercial use,
however it can be used in either commercial or domestic
environments. Care should be taken to ensure the user has
read and understand the safety instruction.
2. Preparing the appliance for use
1. Plug the appliance into the power socket
2 Turn the Wand to the ON-position
3. Using the botton select your desired temperature setting
4. The lights will flash, when the Wand is switched on and
will remain on throughout operation. Once the Wand has
reached your selected operating temperature, the light
will remain lit
5. Wand turns into sleep-mode after 90 minutes
9