LINE ARRAY
ARRAY
Designed and Engineered in the UK by HH Electronics LTD.
© 2020 HH Electronics Ltd
Remove the 6 x M10 x 30mm travel bolts and store for future use. Their locations are shown below:
1
2
Note that eye bolts for flying systems must be cast,
shouldered fittings rated for the purpose.
Forged steel eye bolts of the type typically available
from DIY suppliers are NOT suitable and should
not be used under any circumstances.
All suspension cables, shackles and other mounting
hardware must be properly secured to the eye
bolts and be capable of exceeding max load.
Do not fly multiple cabinets together, each must be
flown on their own.
TNA-1800S cabinets are fitted with 6 x M10 flying points for installation and suspended use.
Suspension and installation of the TNA system MUST be performed by a qualified and certified installation
engineer and must abide by safety regulations within your region. Failure to do so could result in serious injury
or death!"
SUSPENSION
1
2
Replace with suitable M10 eye bolts.
Ensure their threads are fully engaged into the inserts.
Forged steel eye bolts of the type typically available
from DIY suppliers are NOT suitable and should
not be used under any circumstances.
Note that eye bolts for flying systems must be cast,
shouldered fittings rated for the purpose.
All suspension cables, shackles and other mounting
hardware must be properly secured to the eye
bolts and be capable of exceeding max load.
Do not fly multiple cabinets together, each must be
flown on their own.
LEFT
TOP
RIGHT
REAR
3
20mm minimum thread length
M10 thread