LINE ARRAY
ARRAY
Designed and Engineered in the UK by HH Electronics LTD.
© 2020 HH Electronics Ltd
REAR PANEL - I/O
INTRODUCTION
The UK designed TNA-1800S passive line array subwoofer features a HH designed 18" low frequency woofer with exceptional
high output. The TNA-1800s offers a Max SPL of 135dB and a frequency response as low as 30Hz. The 15mm plywood cabinet;
combined with tough road-ready paint finish, ensures damages produced from touring are reduced to a minimum, while the
integrated 6 x M10 Penn Elcom points and M20 threaded pole mount facilitate flown and ground installation.
When combined with the TNA-2051 and TNA-1200S, the TNA-1800S offers an ideal venue installation or point source solution.
Ideal for venues, schools, sports, gyms, hotels and more.
WIRING
± 1 INPUT
± 2 N/A
INPUT
LINK
DESIGNED AND ENGINEERED
IN THE UK BY
WWW.HHELECTRONICS.COM
MODEL
: TNA-1800S
IMPEDANCE
: 4
Ω
POWER AES
: 500W
POWER PEAK
: 2000W
FREQ RANGE
: 30-1KHz
SENSITIVITY
: 102dB (1W/1M)
2: LINK:
Connected in parallel with the Input connector allowing for additional cabinets to be added to the speaker chain.
DO NOT CONNECT A SECOND AMPLIFIER TO THE LINK OUTPUT!
As with the TNA-1200S, the TNA-1800S features two NL4 ±1 Twist Lock Connectors.
1: INPUT:
To be connected to the Output of your chosen amplifier. Check the technical specification of your amplifier to
ensure its drive capability and output power are suitable for use with a TNA-1800S cabinet.
INTERNAL CONNECTION DIAGRAM
LF DRIVER
+
1+
1+
1-
1-
1-
1-
2-
2-
(NOT CONNECTED)
(NOT CONNECTED)
2+
2+
2-
2-
(NOT CONNECTED)
(NOT CONNECTED)
2+
2+
1+
1+
_
INPUT
LINK
2