CONTROL PANEL
10
1-4: MONO INPUT CHANNELS.
5. PEAK:
Adjust the level controls and signal
level from your source(s) so the LED
illuminates only briefly on peaks in the music.
Using the system with this LED on all or
most of the time will result in poor sound
quality.
6. MIC INPUT:
A balanced XLR input for
low level, low impedance devices eg. - mic
(200-600ohms) or
electro-
acoustic guitar.
7. LINE INPUT:
an unbalanced input - for
higher output line level devices eg. -keyboard,
processor, sample/drum machine etc.
Note: Mic and Line inputs can be used
simultaneously.
8. EQ:
2 band active EQ for adjusting the
signal. Setting both controls to 0 is a good
starting point.
9. ECHO:
This control determines how
much (if any) of each channel is sent
through the onboard echo FX processor -
also see (15)
10. LEVEL:
Controls the channel level to the master volume - also see (22).
11. CH 5/6:
A multi input line level Stereo channel. Choose from 2x 6.35mm jack, RCA or 3.5mm jack. Any
combination, or all can be used together.
12. LEVEL:
Control the level of signal from channel 5/6 to the Master Volume.
13
:
AUX IN:
Connect an audio feed from an external MP3 player or mobile phone here. Please use a stereo cable for
this. The level can be adjusted using Level control(12).
14. PHANTOM POWER:
Turns on Phantom Power to all Mic channels should it be needed, eg. condenser mic’s.
15. MASTER ECHO:
Control the overall level of the feed from the onboard FX processor. If you want to apply Echo
to a mono channel, first set the Master control to 5. Slowly increase the Input Echo send control until the desired amount
of echo is achieved. The Master control can then be used to control the overall Echo level.
16. MEDIA PLAYER LEVEL:
Controls the overall level of music from the onboard media player. See media player
controls.
17. MONITOR OUTPUTS:
A convenient way of connecting your HH S2-210 to another device such as an
additional amp/speaker setup, recording device or possibly both at the same time via the jack and RCA
connectors or 6.35mm jacks. You can also monitor this signal feed via headphones.
18
.
MONITOR LEVEL:
Control the MONITOR OUTPUT and headphone level.
19: HEADPHONES:
Connect your headphones here. The volume can be adjusted using level control (18).
20. OUTPUT LEVEL METER:
Use this to give an idea of the overall output level of your HH S2-210 system. If the
LIMIT led is constantly on, reduce the MASTER VOLUME (22)
21. POWER LED:
This will illuminate when the unit is powered up.
22. MASTER VOLUME:
Controls the overall level of your HH S2-210 system.
Содержание SYSTEM 2 S2-210
Страница 1: ...SYSTEM 2 FULL RANGE ENCLOSURES WITH A DETACHABLE MIXER ...
Страница 2: ......
Страница 20: ......
