HGST Ultrastar 7K2 Скачать руководство пользователя страница 40

Страница: 40 / 51

Ultrastar 7K2

HGST Hard Disk Drive Technical Reference Manual

Queue Depth

Bit 15-5: Reserved

Bit 4-0: Maximum queue depth - 1

001Fh

Serial ATA Capabilities Bit 15-13: Reserved

Bit 12: If set, supports Native Command Queuing priority

information

Bit 11: If set, supports Unload while NCQ commands outstanding

Bit 10: If set, supports Phy event counters

Bit 9: If set, supports receipt of host-initiated interface power management requests

Bit 8: If set, supports Native Command Queuing (NCQ) Bit 7-3: Reserved for future

Serial ATA signaling speed grades

Bit 2: If set, supports Serial ATA Gen2 signaling speed (3 Gb/s)

Bit 1: If set, supports Serial ATA Gen1 signaling speed (1.5 Gb/s)

Bit 0: Shall be cleared to zero

9F0Eh

Serial ATA Additional Capabilities Bit 15-8: Reserved

Bit 7: If set, Supports DevSleep_to_ReducedPwrState

Bit 6: If set, Supports Supports RECEIVE FPDMA QUEUED and SEND FPDMA

QUEUED commands Bit 5: If set, Supports NCQ NON-DATA Command Bit 4: If

set, Supports NCQ Streaming

Bit 3-1: Coded value indicating current negotiated Serial ATA signal speed

Bit 0: Shall be cleared to zero

0004h

Serial ATA Features Supported

Bits 15-7: Reserved for Serial ATA

Bit 6: If set, device supports software settings preservation Bit 5: Reserved for Serial ATA

Bit 4: If set, device supports in-order data delivery

Bit 3: If set, device supports initiating power management Bit 2: If set, device supports

DMA Setup Auto-activation Bit 1: If set, device supports non-zero buffer offsets

Bit 0: Cleared to zero

004Ch

Serial ATA Features Enabled

Bits 15-7: Reserved for Serial ATA

Bit 6: If set, software settings preservation enabled Bit 5: Reserved for Serial ATA

Bit 4: If set, In-order data delivery enabled

Bit 3: If set, device initiated power management enabled Bit 2: If set, DMA Setup Auto-

activation enabled

Bit 1: If set, non-zero buffer offsets enabled Bit 0: Cleared to zero

0040h

Major Version Number Bits 15-10: Reserved

Bit 9: if set, supports ACS-2

Bit 8: if set, supports ATA8-ACS Bit 7: if set, supports ATA/ATAPI-7

Bit 6: if set, supports ATA/ATAPI-6 Bit 5: if set, supports

ATA/ATAPI-5 Bit 4 –1: Obsolete

Bit 0: Reserved

03FEh

Minor Version Number

001Fh

Command and feature sets supported

Bit 14: If set, NOP command supported

Bit 13: If set, Read buffer command supported Bit 12: If set, Write buffer

command supported Bit 11: Obsolete

Bit 10: If set, Host Protected Area Feature Set supported Bit 9: If set, Device Reset

command supported

Bit 8: If set, Service interrupt supported Bit 7: If set, Release interrupt

supported Bit 6: If set, look-ahead supported

Bit 5: If set, Write Cache supported

Bit 4: Cleared to 0 to indicate that the PACKET feature set is not supported.

Bit 3: If set, mandatory Power Management Feature Set supported

Bit 2: Obsolete

Bit 1: If set, Security Feature Set supported Bit 0: If set, SMART Feature

Set supported

706Bh

Command Set Supported

Bit 15: Shall be cleared to 0 Bit 14: Shall be set to 1

Bit 13: If set, Flush Cache EXT command supported

Bit 12: If set, mandatory Flush Cache command supported Bit 11: If set, DCO feature set

supported

Bit 10: If set, 48-bit Address Feature Set supported Bit 9: Not supported

Bit 8: If set, Set Max Security Extension supported Bit 7: Reserved

Bit 6: If set, Set Features subcommand required to spin-up after power-up

Bit 5: If set, Power-Up In Standby feature set supported Bit 4: Obsolete

Bit 3: If set, Advanced Power Management feature set supported

Bit 2: If set, CFA feature set supported

Bit 1: If set, Read/Write DMA Queued supported

Bit 0: If set, Download Microcode command supported

7469h

Содержание Ultrastar 7K2




















































Результаты поиска

Содержание Ultrastar 7K2

Отзывы:

Бренды по названию

Популярные бренды

HGST Ultrastar 7K2, Техническое справочное руководство

Результаты поиска

Содержание Ultrastar 7K2

Отзывы:

Бренды по названию

Популярные бренды