COMPUSHIFT Mini Manual – COMPUSHIFT Mini Manual
Installing the COMPUSHIFT Mini
–
34
depending on whether or not you have successfully calibrated the sensor before.
Press the "up" key on the COMPUSHIFT Mini to start the calibration process.
Press the accelerator pedal completely to the floor and release it.
You have five seconds to do this.
During the calibration process, a 5-second timer counts down and shows on screen.
5.00
4.00
3.00
2.00
1.00
When the time finishes, the screen should show:
CAL GOOD
Without pressing the "select" button, move the accelerator pedal though its range of motion slowly.
If the calibration has been performed properly, "CAL GOOD" should remain on the screen.
If not, and "CAL BAD" shows up, you will need to carefully repeat the calibration process.
Once the throttle position sensor has been successfully calibrated, you should be ready to drive.