HG soldatech EL120HG, Руководство пользователя, Страница: 24 / 39

ENG
24
To prevent any unintended arcs, cut wire back to ¼” stick out after welding.
Hot Materials
Welded materials are hot and can cause severe burns if handled improperly.
•
Do not touch welded materials with bare hands.
• Do not touch MIG gun nozzle after welding until it has had time to cool
down.
Sparks/Flying Debris
• Welding creates hot sparks that can cause injury. Chipping slag off welds
creates flying debris.
• Wear protective apparel at all times: ANSI-approved safety glasses or
shield, welder’s hat and ear plugs to keep sparks out of ears and hair.
Electromagnetic Field
• Electromagnetic fields can interfere with various electrical and electronic
devices such as pacemakers.
• Consult your doctor before using any electric arc welder or cutting device
• Keep people with pacemakers away from your welding area when wel-
ding.
• Do not wrap cable around your body while welding.
• Wrap MIG gun and ground cable together whenever possible.
• Keep MIG gun and ground cables on the same side of your body.
Shielding Gas Cylinders Can Explode
High pressure cylinders can explode if damaged, so treat them carefully.
•
Never expose cylinders to high heat, sparks, open flames, mechanical
shocks or arcs.
• Do not touch cylinder with MIG gun.
• Do not weld on the cylinder
• Always secure cylinder upright to a cart or stationary object.
• Keep cylinders away from welding or electrical circuits.
• Use the proper regulators, gas hose and fittings for the specific applicati-
on.
• Do not look into the valve when opening it.
• Use protective cylinder cap whenever possible
Proper Care, Maintenance and Repair
• Always have power disconnected when working on internal components.
• Do not touch or handle PC board without being properly grounded with
a wrist strap. Put PC board in static proof bag to move or ship.
• Do not put hands or fingers near moving parts such as drive rolls of fan