Heylo TD 300 MID, Руководство пользователя

Страница: 11 / 14

8. Technical Data
Model TD 300
Air flow rate max. 445 m³/h
Connection 230V / 50Hz
Fuse 16 A
Height x Width x Depth 30 x 25 x 28 cm
Weight 3,2 kg
Engine output 85 W
Noise level at 1 m distance 58 dB(A)
IP-class IP 22
Attention:
Technical data can be changed during the course of further development without prior
announcement. Some values are approx.
– values.
9. Troubleshooting
WARNING
: All maintenance work listed below must be carried out without current, i.e. with the plug
pulled out.
PROBLEM CAUSE Exec. SOLUTION
Motor does not run No power supply to the
device
Switch not turned on
Fan wheel blocked
Air inlet or outlet blocked
Switch interrupted
Wiring loose B
B
B
B
AST
AST Connect device, check fuse.
Turn on switch
Remove reason for blockage
Switch off machine and let it cool off;
then remove blockage.
Order a replacement switch from the
dealer or HEYLO.
Check wiring and tighten as per
requirement.
Motor runs but wheel
turns irregularly or
hits the sides A heavy impact has bent
the engine suspension so
that the wheel is stuck.
A heavy impact has let the
engine slide out of the
suspension so that the
wheel is stuck. AST
AST Dismantle engine from the housing,
then replace or repair the bent engine
suspension.
Dismantle the engine from the housing
and then place it correctly into the
suspension.
Device vibrates
excessively Collection of dirt on the
wheel
Unbalance of the fan
wheel
Fan wheel bent
Motor shaft bent B
AST
AST
AST Clean fan wheel
Balance out or replace fan wheel
Change fan wheel
Change motor
Exec.: B - User AST - authorised service engineer
Contact your local dealer or HEYLO customer services department for spare parts and service.