Ventilator
PV 8000
EN
10
Safety Instructions
Read and understand manual before operating.
ELECTRIC SHOCK HAZARD
WARNING! Unit must be grounded.
▪
Use indoors only.
▪
Do not operate in standing water.
▪
If motor or wiring gets wet, allow to dry completely before using.
▪
Clean with compressed air or vacuum or wipe with a damp cloth. Do not use hose or
pressure washer.
▪
To reduce the risk of fire or electric shock, do not use this airmover with any solid-state
speed control device.
▪
Insert 3-prong plug on power cord only into outlet with Ground Fault Circuit Interrupting
device.
▪
Never cut off third prong.
FIRE HAZARD
▪
Keep air intakes and grills clear of obstructions and dirt. Reduced airflow can cause
motor to overheat. Keep away from draperies or other material that could block air
intakes.
▪
Keep away from open flames and heat sources.
▪
Do not use or store where flammable vapors such as from gasoline, solvents or thinners
may be present.
SAFETY INSTRUCTIONS
WARNING! Unplug unit before opening housing for cleaning or servicing
.
•
Always operate the unit on a stable, level surface.
•
Turn off unit. Unplug unit before lifting or moving. The powerful airflow can make the
unit difficult to control.
•
Inspect the power cord before use. If cord is damaged, do not use. Replace with a cord
of the same type and amperage rating. Protect cord from damage by turning off unit
before unplugging. Always grasp the plug (not pulling on the cord) to unplug.
•
The unit is designed to operate on a 230V 50 Hz electrical connection. Make sure that
the electrical outlet is grounded.
•
Handle the unit carefully. Do not drop, throw, or place on unstable surface where it
could fall. Rough treatment can damage the unit, and may create a hazardous condition
or void the warranty.
•
Keep children away from unit. Be sure unit is inaccessible to children when it is not
attended.
