Step 5: Jacks + Switches
Install but DO NOT SOLDER the jacks and toggle switches into the control
PCB.
IF YOUR KIT HAS KOBICONN JACKS (TAN-COLOURED PLASTIC BODY), LEAVE THE
ROUND NUT ON THE JACK WHEN YOU INSTALL THEM. THIS ROUND NUT WILL ACT LIKE
A SPACER. The kits include hex nuts which you will use for the actual nut
that goes on the panel :)
IF YOUR KIT HAS WQP/ERTHENVAR JACKS (BLACK/SILVER BODY), INSTALL THEM INTO
THE PCB WITHOUT ANY NUT ON, AS USUAL.
DO NOT SOLDER ANYTHING YET!
