www.myhexagone.com • [email protected] • Tél. +33 1 34 34 11 55
4. How to use your pool vacuum cleaner Quick Vac?
A. Pool entry
• The trolley and the
power
box should be placed so that the robot can reach all
corners of the pool;
•
Be sure to unroll the entire self-floating cable at the edge of the pool, avoiding
loops,
before entering the unit in
to the
water.
• Install a telescopic
handle
(adapted to the dimensions of the pool) on the bracket at
the
rear of the vacuum, then clip into place (you hear a «click» indicating that the
handle is
in place). This will allow you to guide the QUIK VAC during cleaning
operations.
• I
• Immerse the cable and the vacuum cleaner in the water, taking care to position
the vacuum cleaner on its wheels. For this operation use the side handle provided for
this purpose.
CAUTION!
Never
turn
the QUICK VAC out of
the
water,
i
t
may
damage the
pump and void
your
warrant
y.
B.
Start up
Immerse the device first.
Connect the plug to the base of the power supply box, the pump starts immediately.
You can then start to clean your pool.
In case of electrical cabinet:
Make sure the power button is OFF before connecting the AC outlet. You can then
connect the power outlet.
Then immerse the device, plug in the device and press the switch button to turn it
ON. You can then start cleaning.
8
