SHEET TITLE :
SHEET NO. :
NOTICE:
HexaCrafter ltd. reserves proprietary
rights to this drawing and data shown
thereon. Said drawings and/or data
are CONFIDENTIAL and are not to
be reproduced for any purpose
without the written consent of
HexaCrafter ltd.
ISSUE / DATE:
DRAWN BY:
01-17-2017
ARR
HexaCrafter ltd.
2750 Northampton Road
Cuyahoga Falls, Ohio 44223
(330) 929-0989
www.hexacrafter.com
DETAIL: MAINFRAME ASSEMBLY
STEP 7 - MAINFRAME/ ARM ASSEMBLY
QXS-6
QXS SERIES
AIRFRAME
ASSEMBLY
MANUAL- PAGE 6
ARM ASSEMBLIES WITH ROUND INTERNAL
INSERTS FOR ROTATING ARMS PARTIALLY
ASSEMBLED IN STEP 1
BOTTOM CENTER PLATE
ASSEMBLY FROM STEP 2.
TOP CENTER PLATE
ASSEMBLY FROM STEP 4.
SHCS-3X35
HEX CAP SCREW- (3) AT EACH
ARM LOCATION (ROTATING ARMS)
SHCS-3X8
HEX CAP SCREW AT
FRAME STANDOFF LOCATIONS
SLHN-3
STEEL LOCKING HEX NUT-
3MM- INNER (4) LOCATIONS
KNN3
3M KNURLED NUTS FOR FAST & EASY
REMOVAL OF (8) OUTER NUTS.
SHCS-3X35
HEX CAP SCREW
NOTE: 3MM LOCK WASHERS & FLAT WASHERS
ARE INCLUDED IN KIT & SHOULD BE USED.
NOT SHOWN IN THIS DIAGRAM.
