SHEET TITLE :
SHEET NO. :
NOTICE:
HexaCrafter ltd. reserves proprietary
rights to this drawing and data shown
thereon. Said drawings and/or data
are CONFIDENTIAL and are not to
be reproduced for any purpose
without the written consent of
HexaCrafter ltd.
ISSUE / DATE:
DRAWN BY:
01-17-2017
ARR
HexaCrafter ltd.
2750 Northampton Road
Cuyahoga Falls, Ohio 44223
(330) 929-0989
www.hexacrafter.com
HEXACRAFTER ONLINE ASSEMBLY VIDEOS & PHOTOS:
PLEASE VISIT OUR WEBSITE: www.hexacrafter.com FOR DETAILED ASSEMBLY VIDEOS & PHOTOS.
CONTACT HEXACRAFTER FOR ASSISTANCE OR WITH BUILD QUESTIONS.
DETAIL: POWER PLATE ASSEMBLY
STEP 6E- 15MM LOAD RAILS- WITH STRUT MOUNTED RETRACTS
QXSEPP QUADCOPTER
ELECTRICAL POWER PLATE
SHCS-3X8 OR 3X10
HEX CAP SCREW
SHCS-3X30
HEX CAP SCREW
LRMB-12
LOAD RAIL MOUNTING BRACKET
RGF12
RUBBER GROMMET
12MM OR ASSEMBLED 15MM
CARBON FIBER LOAD RAILS
USE THESE HOLES FOR
60MM LOAD RAIL SPACING
USE THESE HOLES FOR
80MM LOAD RAIL SPACING
THREADLOCK COMPOUND RECOMMENDED
DETAIL: POWER PLATE ASSEMBLY
STEP 6D- OPTIONAL LANDING GEAR STRUTS
SHCS-3X10
HEX CAP SCREW
ASSEMBLED STRUT
PLATE FROM STEP 5C
RLGST
RETRACTABLE
LANDING GEAR STRUT
TUBE
QXSEPP QUADCOPTER
ELECTRICAL POWER PLATE
SHCS-3X10
HEX CAP
SCREW- (3) EA PER STRUT
3MX20FFAL
HEX STANDOFF
THESE 3 STANDOFFS GO
INSIDE EACH STRUT TUBE
SHCS-3X10
HEX CAP SCREW
SHCS-3X18
HEX CAP
SCREW- (6) EA INTO
STANDOFFS
QXS-5B
QXS SERIES
AIRFRAME
ASSEMBLY
MANUAL- PAGE 5B
KLR15
LOAD RAIL ADD-ON ACCESSORY
(SHOWN)
KLR-10 & KLR12
LOAD RAIL ADD ON
ACCESORIES ALSO AVAILABLE- REFER TO
ADD-ON ACCESSORIES ASSEMBLY MANUAL
QLRRP - QUADCOPTER LOAD RAIL
REINFORCEMENT PLATE PLATE- ADD-ON
OPTIONAL ACCESSORY- USE WHEN HEAVY
LOADS WILL BE APPLIED TO LOAD RAILS-
CONTACT HEXACRAFTER FOR INFORMATION
3MX15FFAL OR 3MX20FFAL
HEX
STANDOFF BASED ON USER
CLEARANCE REQUIREMENTS
