CHUCK Bolting Data Processor
Operations Manual
CHUCK and all materials within copyright HEX TECHNOLOGY (2021)
11
In the initial configuration, CHUCK is set up for a 3-inch 150# flange, a 4-inch 1500# flange, and
a “Torque Stand.” If you want to use a different configuration, you can set that up on the
configuration screen.
To change a station’s configuration, click the cog icon (
) in the upper right corner. You will
arrive at a Station Setup window:
In Station Setup, you can adjust…
•
Station Description
, which is the text in the navigation button at the top of the page
•
Number of studs
: Up to 16 studs maximum
•
Size of studs
: Currently supports 5/8”, 3/4", or 1-1/4”.
•
Data display style
: Flange or Multi-Trial
o
Flange
means the Station’s data display page will show a flange diagram along
with columns showing the bolt load on each stud. The columns will change in
real time as bolt loads change.