Stepladder safety
Installing Superdome Flex Grid cables or accessing components located near the top of a rack might require using a
stepladder. To properly use a stepladder:
WARNING: Always exercise caution when using a stepladder. Failure to do so may result in serious personal injury.
• Visually inspect the stepladder to make sure that the feet and steps are clean and in good repair prior to use. Do not
use a stepladder that is in disrepair.
• Place the stepladder on a stable and level surface.
• Position the stepladder side-on to the rack, rather than straight on, to reduce reaching as you install components.
• Use the ladder handhold while climbing the stepladder.
• Be aware that tools and equipment that you carry up the ladder could fall from the top of the rack 2 m (6 ft.). Falling
tools could cause personal injury to personnel in the work area.
• Do not rely on the slip-resistant feet to stabilize the ladder and prevent it from moving. Always stand in a stable
position on the ladder in case it moves unexpectedly.
• Do not move the stepladder when someone is on it.
• Do not carry objects or loads that could cause you to lose your balance and fall.
• Do not reach too far when installing components.
• Store the ladder in a safe place that limits use by unauthorized personnel and reduces the likelihood that someone will
trip on it.
Safety considerations
10
