Hewlett Packard Enterprise StoreEver 8096, Руководство пользователя и сервисное руководство

Страница: 103 / 245

• Critical — the component has an error condition that should be addressed. The Library might not be
fully functional.
• Failed — the component has a known failure and should be replaced.
Viewing network information (Status/Information > Network Information)
Procedure
1. From the Home screen, press Previous or Next until the screen displays Status/Information . Press
Enter to select.
2. Press Previous or Next until the screen displays Network Information . Press Enter to select.
3. Press Previous or Next to access the following information:
• IPv4 Network Enabled or Disabled
• IPv6 Network Enabled or Disabled
• Host Name
• Domain Name
• MAC Address
4. For IPv4 Network or IPv6 Network, press Enter and then use Previous or Next to access the network
addresses and configuration.
Configuring the library
Configure the library from the Configuration menu.
Procedure
1. From the Home screen, press Previous or Next until the screen displays Configuration .
2. Press Enter to select.
3. Press Previous or Next until the screen displays your selected function.
• Configuring logical libraries (Status/Information > Set Logical Libraries) on page 104
• Changing the administrator password (Configuration > Change Admin Password) on page 104
• Setting the number of reserved slots (Configuration > Set Reserved Slot Count) on page 105
• Configuring the mailslot (Configuration > Configure Mailslot) on page 105
• Configuring the bar code reporting format (Configuration > Barcode Format Reporting) on page
105
• Changing the SCSI address — parallel SCSI drives (Configuration> Change Drive) on page 106
• Changing the drive configuration — Fibre Channel drives (Configuration> Change Drive) on
page 106
• Setting the master drive (Configuration > Set Master Drive) on page 107
Viewing network information (Status/Information > Network Information) 103