Hewlett Packard Enterprise Smart Array P416ie-m SR Gen10 Controller, Руководство пользователя

Страница: 20 / 75

Item Total D3940 drive bays Average Drive Count
1
Maximum Performance per
Compute Module
2
1 40 SFF drives 4 SFF 200K IOPS
2 80 SFF drives 10 SFF 500K IOPS
3 120 SFF drives 20 SFF 1M IOPS
4 160 SFF drives 40 SFF 1M IOPS
1
Based on full Synergy Frame.
2
Assumes that 12G SAS SSD drives are running 4 KB random read workload using a redundant configuration.
Synergy SAS storage solution planning guidelines
When planning the installation of components in a frame, the following guidelines must be observed.
• Select up to three HPE Synergy D3940 Storage Modules per frame when installing a single HPE Synergy 12Gb SAS
Connection Module.
• Select up to five HPE Synergy D3940 Storage Modules per frame when installing dual HPE Synergy 12Gb SAS Connection
Modules.
• One SAS I/O adapter is included with every D3940 Storage Module.
• For redundancy and higher performance when using dual-ported SAS drives, a second I/O adapter and connection module
must be added.
• Any compute module connecting to a HPE Synergy D3940 Storage Module must have an HPE Smart Array Controller
populated in fabric 1, which is mezzanine slot 1 or 4.
NOTE: HPE Synergy graphics Mezzanine Card and HPE Synergy 480 Gen10 PCIe Expansion Module are not supported
with Synergy SAS Storage because they must occupy Synergy 480 Gen 10 mezzanine slot 1. For GPU support, a Synergy
480 Gen10 Multi-MXM Expansion Module can be used with the Smart Array controller in mezzanine 4.
• If the HPE Synergy D3940 Storage Module is configured with two SAS I/O adapters, a second SAS connection module is
required.
20 Planning