• The air vents on the enclosure are not blocked or restricted.
• The ambient air temperature at the front of the enclosure does not exceed 43°C (109.4°F) while the
switch is operating.
IMPORTANT:
The dust covers that ship with your Brocade 32Gb FC Switch Module
must
be
inserted into any ports where SFPs are not installed, to help contain air flow in the Synergy frame.
Installing the Brocade 32Gb FC Switch Module
For help identifying your specific enclosure setup and available connections, see the
HPE Synergy 12000
Frame Setup and Installation Guide
, provided with your enclosure, or the website:
.
Install the Brocade 32Gb FC Switch Module into the enclosure:
Procedure
1.
Locate the appropriate interconnect bay in the frame.
CAUTION:
Properly ground yourself before handling the switch.
NOTE:
Populate all frame interconnect bays with an interconnect module or one of the blank panels
provided.
2.
Press the latch to release the switch handle.
1
2
Figure 3: Releasing the installation handle
1. Latch
2. Switch Handle
NOTE:
The Brocade 32Gb FC Switch Module is a hot-pluggable device. The frame power may be on
or off during installation.
3.
Align the Brocade 32Gb FC Switch Module with the appropriate interconnect bay according to your
frame’s specific configuration. Push the switch firmly into the interconnect bay.
Setup
13
Содержание Brocade 32Gb/12 2SFP+
Страница 5: ...Q 44 R 45 S 45 T 46 U 46 W 46 Z 47 5...
