Example output
switch(config)# debug mvrp all
switch(config)# show debug
Debug Logging
Source IP Selection: Outgoing Interface
Origin identifier: Outgoing Interface IP
Destination: None
Enabled debug types:
mvrp event include port A1-A24,F1-F24
mvrp packet include port A1-A24,F1-F24
mvrp state-machine include port A1-A24,F1-F24
mvrp timer include port A1-A24,F1-F24
Configuring MVRP
Enabling MVRP globally
MVRP must be enabled globally to allow the device to participate in the protocol.
Syntax
mvrp {enable | disable}
no mvrp
Description
Enables MVRP globally on a switch. MVRP must be enabled globally and at least on one interface. The
no
form of the command disables MVRP.
Parameters
enable
Enable MVRP.
disable
Disable MVRP.
Example output
switch# show mvrp config
Configuration and Status - MVRP
Global MVRP status : Enabled
Port Status Periodic Registration Join Leave LeaveAll Periodic
Timer Type Time Timer Timer Timer
------- -------- -------- ------------ ---- -------- -------- --------
1 Disabled Enabled Normal 20 300 1000 100
2 Disabled Enabled Normal 20 300 1000 100
Enabling MVRP on an interface
By default, MVRP is disabled on all interfaces.
Syntax
mvrp {enable | disable}
Chapter 4 Multiple VLAN Registration Protocol
79
