Hewlett Packard Enterprise Apollo 4200 Gen10, Руководство пользователя

Страница: 47 / 159

Close the cable management holder
Procedure
1. Secure all system cables in the cable management holder, and then connect them to the system board or controller board.
2. Return the cable management holder to its original position.
3. Install the air baffle (Install the air baffle ).
Remove the rear drive cage blank
Procedure
1. Power down the system (Power down the system).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the system.
3. Remove the system from the rack (Remove the system from the rack).
4. Place the system on a flat, level work surface.
5. Remove the access panel (Remove the access panel).
6. Remove the rear drive cage blank.
Operations
47