MF877-00 Page 3
Template Revision A
HPE instructions for this template are available at
3. Remove the fan assembly PCA
9. Remove the main PCA
1. Using a Phillips screwdriver, remove the four screws securing the sheet metal air flow guide from the left side of
the main PCA
2. Remove the sheet metal air flow guide
3. Repeat the above steps for the sheet metal air flow guide on the right side of the main PCA
4. Using a small adjustable wrench, remove the three hexagonal studs near the heat sink
5. Using a Phillips screwdriver, remove the six screws holding down the main PCA
10. Using a Phillips screwdriver, loosen the four heat sink screws and remove the heat sink
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
