-
9
-
If you return earlier than expected, press
RUN SCHED button to resume program.
Press
△
or
▽
to immediately adjust the
temperature. This will temporarily override the
temperature setting for the current time period.
The new temperature will be maintained until the
time you set. When the timer expires, the program
schedule will resume and set the temperature to
the level you’ve programmed for the current time
period.
To cancel the temporary setting at any time, press
RUN SCHED
. The program schedule will
resume.
Inquiry for filter count back time
This operation is only available when filter replacement time is set. Configuration menu item 17 explains
the way for inquiry for the count back time.
Inquiry for UV lamp duration time
This operation is only available when UV lamp duration time is set. Configuration menu item 18 explains
the way for inquiry for the UV lamp duration time.
Screen cleaning
Press
CLEAN DISPLAY
to lock the screen
for cleaning. The screen will remain locked for 30
seconds so you can clean the screen without
changing any setting.
After 30 seconds, press
DONE
to resume normal
operation, or press
CLEAN DISPLAY
again if
you require more time for cleaning.
Note: Do not spray any liquid directly on the
thermostat. Spray liquids onto a cloth, then use the
damp cloth to clean the screen. Use water or
household glass cleaner. Avoid abrasive cleansers
Press
RUN SCHED
to resume program
schedule
Adjust temperature
Press to set time
Press
CLEAN DISPLAY
Screen lock timer
(count back 30 seconds)
